Gortube® Series Cable Carriers

How to Create a Part Number:
Model – Height – Length – Bracket (fixed end) – Bracket (moving end)

Example: C2C-11-34.00-Type B-Type A (part numbers specified in inches)

Length is the distance between flanges (B.F. Length); specify in inches (2 decimals).
Length = Travel/2 + CL (+ offset distance from center).
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
Specify a bracket/flange type for each end.

Carrier Cross Section View

Model	A (inner width)	B (inner height)	C (outer width)	D (outer height)	Weight (lb/ft)
CO	1.02	0.63	1.18	0.79	0.40
C1	1.79	1.00	1.97	1.18	0.90
C1A	1.79	1.79	1.97	1.97	0.90
C1B	1.98	1.59	2.17	1.77	0.90
C2	2.97	1.59	3.15	1.77	1.50
C2C	3.17	1.59	3.35	1.77	1.70
C2A	3.56	1.79	3.74	1.97	2.10
C2AA	3.17	2.19	3.35	2.36	2.10
C3	4.11	2.15	4.33	2.36	2.40
C3A	4.29	2.93	4.53	3.15	2.40
C3AA	4.31	2.15	4.53	2.36	2.80
C3C	5.26	3.29	5.51	3.54	3.50
C4	6.48	2.93	6.69	3.15	3.80
C5	6.42	3.50	6.69	3.74	4.00
C6	7.68	3.71	7.87	3.94	4.10
C7	8.43	4.09	8.66	4.33	4.60

Carrier Side View

Height	R (bend radius)	H (curve height)	K (depot)	CL (curve length)	P (min. clearance)
CO-4	1.77	5.15	3.20	7.64	1.00
C1 – 6	2.56	7.12	4.00	9.74	1.50
C1 – 9	3.54	9.10	5.60	14.06	1.50
C1 – 13	5.51	13.06	7.50	20.11	1.50
C1A – 10	3.94	10.65	6.00	14.53	1.50
C1B – 9	3.54	9.67	5.50	13.27	1.50
C2 – 10	3.54	9.67	5.90	14.07	2.00
C2 – 175	7.48	17.56	9.80	26.37	2.00
C2 – 22	8.66	19.91	11.80	31.72	2.00
C2C – 11	3.54	9.67	6.40	15.07	2.00
C2A – 12	4.33	11.48	7.00	16.98	2.50
C2AA – 135	5.51	14.19	7.70	19.33	2.50
C3 – 135	5.32	14.21	7.70	19.11	2.50
C3 – 20	8.27	20.11	11.10	29.28	3.00
C3 – 26	11.22	26.02	14.00	38.45	3.00
C3A – 18	6.69	17.76	9.90	24.29	3.00
C3AA – 13	5.32	14.21	7.30	18.31	3.00
C3C – 18	7.09	18.93	10.00	24.55	3.00
C4 – 18	6.89	18.14	9.90	24.52	3.00
C4 – 23	9.25	22.87	12.50	32.41	3.00
C4 – 31	13.19	30.74	16.40	44.71	3.00
C5 – 22	8.27	21.50	11.90	29.50	3.00
C6 – 23	8.66	22.50	12.50	30.95	3.00
C7 – 24	9.25	24.08	13.00	32.23	3.00

Carrier Cross Section View

Model	A (inner width)	B (inner height)	C (outer width)	D (outer height)	Weight (kg/m)
CO	26	16	30	20	0.6
C1	45	25	50	30	1.34
C1A	45	45	50	50	1.34
C1B	50	40	55	45	1.34
C2	75	40	80	45	2.23
C2C	81	40	85	45	2.53
C2A	90	45	95	50	3.12
C2AA	81	56	85	60	3.12
C3	104	55	110	60	3.57
C3A	109	74	115	80	3.57
C3AA	109	55	115	60	4.17
C3C	134	84	140	90	5.21
C4	165	74	170	80	5.65
C5	163	89	70	95	5.95
C6	195	94	200	100	6.1
C7	214	104	220	110	6.84

Carrier Side View

Height	R (bend radius)	H (curve height)	K (depot)	CL (curve length)	P (min. clearance)
CO-4	45	131	81	194	25
C1 – 6	65	181	102	247	38
C1 – 9	90	231	142	357	38
C1 – 13	140	332	191	511	38
C1A – 10	100	271	152	369	38
C1B – 9	90	246	140	337	38
C2 – 10	90	246	150	357	51
C2 – 175	190	446	249	670	51
C2 – 22	220	506	300	806	51
C2C – 11	90	246	163	383	51
C2A – 12	110	292	178	431	64
C2AA – 135	140	360	196	491	64
C3 – 135	135	361	196	485	64
C3 – 20	210	511	282	744	76
C3 – 26	285	661	356	977	76
C3A – 18	170	451	251	617	76
C3AA – 13	135	361	185	465	76
C3C – 18	180	481	254	624	76
C4 – 18	175	461	251	623	76
C4 – 23	235	581	318	823	76
C4 – 31	335	781	417	1136	76
C5 – 22	210	546	302	749	76
C6 – 23	220	572	318	786	76
C7 – 24	235	612	330	819	76

Standard Flange Options:

Model	A (inner width)	B (inner height)	C (outer width)	D (outer height)	Weight (lb/ft)
CO	1.02	0.63	1.18	0.79	0.40
C1	1.79	1.00	1.97	1.18	0.90
C1A	1.79	1.79	1.97	1.97	0.90
C1B	1.98	1.59	2.17	1.77	0.90
C2	2.97	1.59	3.15	1.77	1.50
C2C	3.17	1.59	3.35	1.77	1.70
C2A	3.56	1.79	3.74	1.97	2.10
C2AA	3.17	2.19	3.35	2.36	2.10
C3	4.11	2.15	4.33	2.36	2.40
C3A	4.29	2.93	4.53	3.15	2.40
C3AA	4.31	2.15	4.53	2.36	2.80
C3C	5.26	3.29	5.51	3.54	3.50
C4	6.48	2.93	6.69	3.15	3.80
C5	6.42	3.50	6.69	3.74	4.00
C6	7.68	3.71	7.87	3.94	4.10
C7	8.43	4.09	8.66	4.33	4.60

Standard Flange Arrangements:

Type A Flange Options:

MODEL NO.	C1	D1	Q	SLOTS	G	S	T	L
CO	1.33	0.94	0.38	0.22 x 0.38	0.75	1.86	1.46	1.25
C1	2.11	1.34	0.69	0.28 x 0.50	1.38	2.80	2.11	1.56
C1A	2.11	2.12	0.69	0.38 x 0.63	1.38	4.00	3.16	2.38
C1B	2.31	1.93	0.69	0.38 x 0.63	1.38	3.75	2.94	2.38
C2	3.32	1.96	1.75	0.28 x 0.50	2.50	3.50	2.88	1.75
C2C	3.52	1.96	1.75	0.28 x 0.50	2.56	3.56	2.81	1.75
C2A	3.92	2.15	2.00	0.34 x 0.50	2.75	3.75	2.94	2.06
C2AA	3.52	2.55	1.75	0.41 x 0.68	2.50	4.31	3.42	3.53
C3	4.58	2.62	2.38	0.34 x 0.50	3.13	4.31	3.50	2.38
C3A	4.78	3.41	2.38	0.34 x 0.50	3.25	5.13	4.38	4.56
C3AA	4.77	2.62	2.38	0.34 x 0.50	3.50	4.39	3.50	3.00
C3C	5.76	3.80	3.25	0.38 x 0.56	4.25	5.53	4.75	3.50
C4	6.94	3.41	3.75	0.34 x 0.50	4.75	5.13	4.31	3.13
C5	6.95	4.01	3.75	0.34 x 0.75	4.75	6.06	5.00	3.69
C6	8.15	4.22	4.00	0.41 x 0.75	5.50	6.22	5.16	3.94
C7	8.94	4.62	4.50	0.41 x 0.75	6.06	6.81	5.81	4.38

Type B Flange Options:

MODEL NO.	C1	D1	Q	SLOTS	G	S	T1	L
CO	1.33	0.94	1.81	0.22 x 0.38	2.31	0.50	1 hole	1.25
C1	2.11	1.34	3.00	0.28 x 0.50	3.68	0.56	1 hole	1.19
C1A	2.11	2.12	3.16	0.38 x 0.63	4.00	1.38	0.69	2.38
C1B	2.31	1.93	3.41	0.38 x 0.63	4.22	1.38	0.69	2.38
C2	3.32	1.96	4.19	0.28 x 0.50	4.81	1.19	1 hole	1.75
C2C	3.52	1.96	4.19	0.28 x 0.50	4.81	1.19	1 hole	1.75
C2A	3.92	2.15	4.88	0.34 x 0.50	5.75	1.00	1 hole	2.06
C2AA	3.52	2.55	4.63	0.41 x 0.68	5.50	1.72	1.13	3.53
C3	4.58	2.62	5.56	0.34 x 0.50	6.38	1.38	1 hole	2.38
C3A	4.78	3.41	5.56	0.38 x 0.50	6.38	2.25	1.50	5.14
C3AA	4.77	2.62	5.56	0.34 x 0.50	6.38	1.38	0.88	3.00
C3C	5.76	3.80	6.91	0.38 x 0.56	7.78	2.75	2.00	3.50
C4	6.94	3.41	7.88	0.34 x 0.50	8.69	1.56	1 hole	3.13
C7	8.94	4.62	10.11	0.38 x 0.63	10.80	3.00	2.25	4.38