Cable/Hose Clamping and Strain Relief

Ready to install cable carrier assemblies can be shipped complete with cables/hoses and necessary clamping.

Proper installation in conjunction with clamping cables ensures that the proper length of cable stays consistently in the carrier. Cables ideally should ride as close to the neutral axis of the carrier as possible.

Cables that are not clamped can either pull against the inner radius, causing jacket and crossbar wear, or they will pull cables into the carrier, causing them to snake and bunch through crossbars at the radius.

Cable clamping is recommended at both moving and stationary ends of a carrier; however, in applications with high-pressure hydraulic hoses, we recommend clamping at the moving end of the carrier only.

Dynatect offers a variety of clamp styles and designs, as well as mounting brackets with incorporated strain relief fingers for a quick and easy zip tie clamping solution. Standard and custom designs are available.

Rail Clamping System

Can be integrated into most carriers
Quick installation
Stackable design provides space efficiency
Available for 1, 2, or 3 stacked cable configurations
Custom spacers can be designed to accommodate cables/hoses too small for the clamp range
Clamp material: hot-dipped galvanized steel (stainless steel available upon request)

On the right, a close-up of a cable carrier system with yellow cables, secured by metallic brackets and bolts. The carrier has a black frame with ventilation features on the sides.

Rail Clamp Specs

Note: Counter pressure cradles are supplied with all clamps. When the clamp rail is specified, length is determined by cable carrier width, number of cable clamps, and/or customer-specified space requirements.

Clamp Rail

Single Stack Clamps

Diameter Range	Overall Width (OA)	Part No.
0.31 (8) – 0.47 (12)	0.63 (16)	PN0348422
0.47 (12) – 0.63 (16)	0.79 (20)	PN0348423
0.63 (16) – 0.87 (22)	1.06 (27)	PN0348424
0.87 (22) – 1.10 (28)	1.30 (33)	PN0348425
1.10 (28) – 1.34 (34)	1.54 (39)	PN0348426
1.34 (34) – 1.57 (40)	1.77 (45)	PN0348427
1.57 (40) – 1.81 (46)	2.01 (51)	PN0348428
1.81 (46) – 2.05 (52)	2.24 (57)	PN0348429
2.05 (52) – 2.28 (58)	2.52 (64)	PN0348430
2.28 (58) – 2.52 (64)	2.76 (70)	PN0348431
2.52 (64) – 2.76 (70)	2.99 (76)	PN0348432
2.76 (70) – 2.99 (76)	3.23 (82)	PN0348433
2.99 (76) – 3.23 (82)	3.46 (88)	PN0348434
3.23 (82) – 3.54 (90)	3.82 (97)	PN0348435
3.54 (90) – 3.94 (100)	4.21 (107)	PN0348436

Double Stack Clamps

Diameter Range	Overall Width (OA)	Part No.
0.31 (8) – 0.47 (12)	0.63 (16)	PN0348437
0.47 (12) – 0.63 (16)	0.79 (20)	PN0348438
0.63 (16) – 0.87 (22)	1.06 (27)	PN0348439
0.87 (22) – 1.10 (28)	1.30 (33)	PN0348440
1.10 (28) – 1.34 (34)	1.54 (39)	PN0348441
1.34 (34) – 1.57 (40)	1.77 (45)	PN0348442
1.57 (40) – 1.81 (46)	2.01 (51)	PN0348443
1.81 (46) – 2.05 (52)	2.24 (57)	PN0348444
2.05 (52) – 2.28 (58)	2.52 (64)	PN0348445
2.28 (58) – 2.52 (64)	2.76 (70)	PN0348446

Triple Stack Clamps

Diameter Range	Overall Width (OA)	Part No.
0.31 (8) – 0.47 (12)	0.63 (16)	PN0348447
0.47 (12) – 0.63 (16)	0.79 (20)	PN0348448
0.63 (16) – 0.87 (22)	1.06 (27)	PN0348449
0.87 (22) – 1.10 (28)	1.30 (33)	PN0348450
1.10 (28) – 1.34 (34)	1.54 (39)	PN0348451
1.34 (34) – 1.57 (40)	1.77 (45)	PN0348452
1.57 (40) – 1.81 (46)	2.01 (51)	PN0348453

Counter Pressure Cradle

Diameter Range	Part No
0.31 (8) – 0.47 (12)	PN0348454
0.47 (12) – 0.63 (16)	PN0348455
0.63 (16) – 0.87 (22)	PN0348456
0.87 (22) – 1.10 (28)	PN0348457
1.10 (28) – 1.34 (34)	PN0348458
1.34 (34) – 1.57 (40)	PN0348459
1.57 (40) – 1.81 (46)	PN0348460
1.81 (46) – 2.05 (52)	PN0348461
2.05 (52) – 2.28 (58)	PN0348462
2.28 (58) – 2.52 (64)	PN0348463
2.52 (64) – 2.76 (70)	PN0348464
2.76 (70) – 2.99 (76)	PN0348466
2.99 (76) – 3.23 (82)	PN0348467
3.23 (82) – 3.54 (90)	PN0348468
3.54 (90) – 3.94 (100)	PN0348469

Double Counter Pressure Cradle

Diameter Range	Part No
0.31 (8) – 0.47 (12)	PN0348474
0.47 (12) – 0.63 (16)	PN0348475
0.63 (16) – 0.87 (22)	PN0348476
0.87 (22) – 1.10 (28)	PN0348477
1.10 (28) – 1.34 (34)	PN0348478
1.34 (34) – 1.57 (40)	PN0348479
1.57 (40) – 1.81 (46)	PN0348480
1.81 (46) – 2.05 (52)	PN0348481
2.05 (52) – 2.28 (58)	PN0348482

More Clamping Options

Custom UHMW Clamps

Can be integrated into most carriers
Quick installation

Custom UHMW Clamps

Zip Tie Bar

Zip tie bars integrated into mounting brackets
Tiered structure for easy access
Double rows of large fingers hold more zip ties
Anti-slip ridges on the bar prevent cable slippage

Zip Tie Bar

Integrated Strain Relief Mounting Brackets

Optional on most cable carriers
Cables secured to tabs using zip ties

Integrated Strain Relief Mounting Brackets

RFQ

RFQ

Cable/Hose Clamping and Strain Relief